Vitec Group

PARALINX | Realtime Wireless Monitoring

Ultralight Uncompressed Realtime Wireless Monitoring

Paralinx is a cinema electronics company founded by Dan Kanes and Greg Smokler, two California-native ICG members, who seek to bring affordable tools to help all cinematographers and directors make films without the burden of wires dragging all over set. 

Paralinx Tomahawk2

TH2.jpg
TH2_3.jpg
TH2_2.jpg
TH2_4.jpg
10-1286-G_Tomahawk2 1-2 Deluxe Kit GM.jpg
10-1285-V_Tomahawk2 1-1 Deluxe Package VM.jpg
10-1285-G_Tomahawk2 1-1 Deluxe Package GM.jpg
10-1286-V_Tomahawk2 1-2 Deluxe Kit VM.jpg
TH2.jpg
TH2_3.jpg
TH2_2.jpg
TH2_4.jpg
10-1286-G_Tomahawk2 1-2 Deluxe Kit GM.jpg
10-1285-V_Tomahawk2 1-1 Deluxe Package VM.jpg
10-1285-G_Tomahawk2 1-1 Deluxe Package GM.jpg
10-1286-V_Tomahawk2 1-2 Deluxe Kit VM.jpg

Paralinx Tomahawk2

from 7,499.95

The Paralinx Tomahawk2 is a long-range HD video system offering real-time wireless HD transmission for your Television, Film, Broadcast, Industrial or UAV/UAS application.

The Tomahawk2 features several improvements from the original Tomahawk:

  • Dual-Input Transmitter (HD-SDI & HDMI)
  • Receiver is lighter and 60% smaller
  • Input voltage range is now 6-28V on Transmitter
  • Machined-aluminum Receiver enclosure improves durability
  • Integrated 1/4-20 & 4-40 mounting points on Tx/Rx
  • Compatible with Teradek Sidekick (1stGen)
  • Compatible with Teradek Bolt 2000, Sidekick1, or Paralinx Tomahawk (1st Gen)*
  • Manual Channel Selection & Pairing Interface using new on-screen menu interface
  • All Transmitter+Receiver sets include custom case

The Paralinx Tomahawk2 has a range of up to 2000 feet** (600m) and maintains an incredible <1ms latency glass-to-glass. Both the transmitter and receiver feature 2-Pin power connectors and the transmitter features a wide 6-28V input voltage range (receiver has 7-17V input). The Tomahawk2 system features both 3G-SDI input (with loop-out) & HDMI input on the transmitter, and a 3G-SDI output on the receiver.

The Tomahawk2 transmits Full-HD video (up to 1080p/60 4:2:2) and is capable of sending video to up to 4 receivers simultaneously. The transmitter weighs approximately 7.3oz/208g (without antennas) and the receiver weighs only 8.9oz/252g (without antennas).

The Paralinx Tomahawk2 System is available for US$7,499.95 for one transmitter and receiver pair. Additional receivers can be purchased for US$3,699.95 each. Battery plates, antennas, mounting brackets, power cables, and custom cases are all available as accessories to help customize your set-up. 

Tomahawk2 Features:

  • Lightweight Minimalist design for Handheld, Steadicam, Gimbal, and UAV Payload

  • Transmitter features both 3G-SDI & HDMI inputs and SDI loop-out. Receiver features 3G-SDI output.

  • Rugged machined-aluminum enclosure for both the transmitter and receiver

  • Ultra long-range transmission - Up to 2,000 feet (600 meters) **

  • REAL-TIME viewing - Less than 1 millisecond latency

  • Visually lossless full-HD video signal allow critically accurate monitoring

  • Multicast capable (up to 4 receivers per transmitter)

  • 128 bit AES Encryption - Secure transmission

  • Operates on 5gHz frequency band

  • Conforms to major technical and environmental standards including FCC, CE, MIC (TELEC) and RoHS Specifications

  • Click here for supported frame rates


*When linked to a Bolt 2000 or Paralinx Tomahawk (1st Gen) unit the following features are not supported: PsF video, Run/Stop, Timecode

**Range may vary depending on environment and interference


Dimensions (Tx): 4.1in x 2.6in x 0.9in (not including antennas/connectors)
Dimensions (Tx): 104mm x 66mm x 22mm
Weight (Tx): 7.3oz / 208g (without antennas)

Dimensions (Rx): 4.6in x 3.5in x 0.9in (not including antennas/connectors)
Dimensions (Rx): 117mm x 88mm x 22mm
Weight (Rx):  8.9oz / 252g (without antennas)

 

1:1 Kits include:
1x Tomahawk2 SDI/HDMI transmitter
1x Tomahawk2 SDI receiver
1x PTap to 2-pin power cable (18in/45cm)
1x AC power supply with 2-pin connector
1x 18in BNC Cable (right-angle to right-angle)
1x HDMI Cable (18in/45cm)
1x Lightstand adapter
2x 5dbi omnidirectional antennas (for transmitter)
5x 2dbi omnidirectional antennas (for receiver)
1x Mini-USB to USB cable (for firmware updates)
1x Custom Case with rugged foam (Pelican 1400)


1:2 Kits include:
1x Tomahawk2 SDI/HDMI transmitter
2x Tomahawk2 SDI receivers
2x PTap to 2-pin power cable (18in/45cm)
1x AC power supply with 2-pin connector
2x 18in BNC Cable (right-angle to right-angle)
1x HDMI Cable (18in/45cm)
2x 5dbi omnidirectional antennas (for transmitter)
10x 2dbi omnidirectional antennas (for receivers)
1x Mini-USB to USB cable (for firmware updates)
1x Custom Case with rugged foam (Pelican 1400)

1:1 Deluxe Kits include:
1x Tomahawk2 SDI/HDMI Transmitter
1x Tomahawk2 SDI Receiver
1x Tomahawk2 Mounting Bracket (for transmitter)
1x Paralinx Dual Battery Bracket (for receiver)
1x AC power supply with 2-pin connector
2x PTap to 2-pin power cables (18in/45cm
1x PTap to 2-pin power cable (6.5in/16.5cm)
1x 2-pin to 2-pin Power Cable (24in/60cm)
2x 18in/45cm BNC cables (right-angle to right-angle)
1x 18in/45cm HDMI cable
1x Mini-USB to USB cable (for firmware updates)
1x Paralinx Array MIMO panel antenna
5x Type-N to RP-SMA antenna cables (for use with Array)
2x 5dbi omnidirectional antennas (for transmitter)
5x 2dbi omnidirectional antennas (for receiver)
1x Lightstand adaptor
1x Custom Case with rugged foam (Pelican 1550)

1:2 Deluxe Kits include:

1x Tomahawk2 SDI/HDMI Transmitter
2x Tomahawk2 SDI Receivers
1x Tomahawk2 Mounting Bracket (for transmitter)
2x Paralinx Dual Battery Brackets (for receivers)

1x AC power supply with 2-pin connector
3x PTap to 2-pin power cables (18in/45cm)
2x PTap to 2-pin power cables (6.5in/16.5cm)
1x 2-pin to 2-pin power cable (24in/60cm)
3x 18in/45cm BNC cables (right-angle to right-angle)
1x 18in/45cm HDMI cable
1x Mini-USB to USB cable (for firmware updates)
1x Paralinx Array MIMO panel antenna
5x Type-N to RP-SMA antenna cables (for use with Array)
2x 5dbi omnidirectional antennas (for transmitter)
10x 2dbi omnidirectional antennas (for receivers)
1x Lightstand adaptor
1x Custom Case with rugged foam (Pelican 1550)

 

PLEASE NOTE: Additional Power Cables for the Tomahawk2 system must be purchased separately. PTap to 2-pin, 2-pin to 2-pin, and JST-RCY to 2-pin options are available.

 

 

System Options:
Quantity:
Add to Cart - Ships in 1-2 Weeks


The Paralinx, Ace, Arrow, Arrow Plus, Arrow-X, Crossbow, Array, Shield, and Tomahawk logos, as well as all product images are © Paralinx LLC and
can only be used with express written permission.